Blair Goal Disassembly

Step 1: Remove the stakes from the goal. There should be a total of 7 stakes. You can use the hook on the hammer in the bag to remove the stakes. Place the stakes and hammer in the bag

Step 2: Remove the net from the clips. Slide the net across the top bar like a curtain. The net should be pushed onto the middle of the 1–1 piece. DO NOT REMOVE THE NET FROM THE CROSSBAR 

Step 3: Remove the 6–7, 7–8, & 8–8 pieces. Flip the goal on its face. BE SURE THAT NO ONE IS UNDER THE GOAL when lowering the goal.

Step 4: Disassemble the rest of the goal. Remember to leave the net on the 1–1 piece.

Step 5: Roll the net on the 1–1 piece, taking care not to let the net fall off the ends. It should be stored on the 1–1 piece

Step 6: Return the goal to the goal bin. The straight pieces should be added first, then the curved pieces, then the ones with the net on them. Check to make sure no parts are left out (they are expensive!)

       

Step 7: Close the bin. Lock the bin.

 

Checklist:

• 1 Hammer (in bag)
• 7 stakes (in bag)
• 6 corner pieces
• 1–1 piece with net attached
• 9 straight pieces
• Total of 16 goal pieces per goal